Less Expensive than clips!
Use with elongated clip holes!
Easy to Use!
The W. D. Davis CWR-1 rivet kit replaces the S-43 fabric retaining clips in the wing rib flange with a large bearing area head “Pop” rivet. The kit consists of 1000 rivets and enough self-adhesive reinforcing tape to do both wings on a Cessna 120/140 or 170.
The wing clips worked well for the first and probably second time the wings were covered, but over the years the holes may have gotten enlarged to the point that the clips no longer fit snugly and canwork their way right through the surface tapes in some cases. If you need to replace all of the clips you will be faced with an expense of over four dollars even with a 40% discount.
Our STC is available for use with either the Poly Fiber covering system or the Super Flight covering system. When ordering your covering materials, do NOT order the rib lacing tapes as these will be provided with the Pop Rivet Kit.
Super Flight Covering System: We charge US$240, postpaid, for the entire kit for the Super Flight System, including all the required paperwork.
Poly Fiber Covering System: We charge $US330, postpaid, for the entire kit for the Poly Fiber System, including all the required paperwork.
Don’t be intimidated by the rivet removal preocedure in the installation instrutions. These rivets have aluminum mandrels and are easliy drilled out without driving the mandrel out first. The aluminum mandrel also eliminates the possibility of dissimilar metal corrosion which is present in steel mandrels.
The cost is $240 for the Super Flight kit and is postpaid.
The cost is $330 for the Poly Fiber kit and is post paid.
The Dip Davis Cowl Pop Rivet STC gives you the authority to install the Dip Davis Pop Rivet wing kit on one specific Cessna 120, 140, or 170 wings. This is a one time use STC, is N number specific and is NOT transferable.
The STC includes 1000 rivets, enough self-adhesive reinforcing tape to do both wings along with all the required FAA paperwork and installation instructions for the install.
Super Flight: The cost is US$240 for the Super Flight kit and is postpaid.
Poly Fiber: The cost is US$330 for the Poly Fiber kit and is postpaid.
We are working on a new form to fill out, until then, Please send us an email using this link: PopRivetInfo@PopRivetSTC.com
Please include the following: Your Name and address, Phone number and email address,
The N number of the plane the Pop Rivet Kit will be installed on,
Shipping address if different than the registered address of the airplane,
What type of Fabric application you are using, Poly Fiber or Super Flight.
Be sure to include your contact information so we can get ahold of you for any questions.
After you contact us, we will let you know payment information.